Review on 🌡️ Mishimoto Performance Aluminum Radiator for Nissan 370Z 2009-2020 (MMRAD-370Z-09) by Gerald Munajj

This radiator looks amazing! I don't expect any benefits , since I don't track, but that's a good price for an aftermarket cooler.I really like that this cooler has the condenser and cooler as SEPARATE UNITS.That way Mishimoto *should* be able to separate the parts replace if one of them breaks.The heatsink and condenser are separate units which makes installation in the g37 MUCH easier.If they weren't separate the bumper would have to be removed as the radiator is much wider but the front bumper is no need to remove as the condenser can be bolted on after the cooler is installed.Highly recommend getting a new AC dryer (under $20) and a set of line prints if you plan on getting the job done and there s Have the refrigerant professionally removed before you begin. It's not difficult to top up the air conditioner yourself using Pag46 oil, two small bottles of R134a, a set of pressure gauges and a vacuum pump (can be borrowed from an auto parts store), but if that sounds complicated, just go to the store. You'll need about 3 ounces of Pag46 to do this job and 2 x 12 ounce cans of r134a (don't use both in full). If you need a new radiator or aircon condenser, get this or the csf unit, I would not buy an original or remanufactured unit. Overall I wouldn't expect any advantages over the original block for people who only work daily. So unless your block is broken or you are not tracking, I would stick with the original block until it breaks.