Review on 💻 Enhance Your Laptop Experience with the Artesa Metal Adjustable Riser Stand in Black by Ron Houston

Opened a new block from the shipping box and placed it on three different flat surfaces, and the block wobbled, i.e. the frame is crooked, straight and With the weight of the laptop and opening it at a higher altitude it could be a little worse. I tried increasing the height of the top and it was very difficult to open. All pivot points are too tight. There are 2 T-25 bolts on each side for the pivot points and loosening them a bit will make it easier to fully adjust the height, but there are also some pivot points that are riveted too tight. Can be easier to adjust by opening and closing several times. Perhaps using some machine oil in these places will make it easier for one or the other to set the desired height. Came without instructions, so some buyers have trouble adjusting the height at first. Due to the low purchase price, the product should be suitable for most users. The device lays flat, making it more difficult to use the keyboard when used with a laptop. It would be better if the top could also be tilted so that the corner of the keyboard would be easier to type when upgrading: further attempts to use this resulted in an inferior product. Glue pivot points and you try to adjust the shelf position and the support arms are too flimsy and then bind and bend. , the product is unusable