Review on 11 Hook Metal Coat Rack Stand - Perfect Entryway Storage Solution By LANGRIA (Black) by Ben Duncan

This worked out very well, not too tall and doesn't have a big footprint, even with coats hanging on all sides.A little difficult to assemble. I is a lot of work getting the screws to actual tap into the holes, particularly with the screwdriver included, to connect all the legs and hooks. Takes some real elbow grease to get some of the holes widened. I recommend you crank a screw into all the holes before you start assembly, to widen them, and then be prepared to work to get them go with the spacers. I found that you had to work to get the screw to start going in straight (they tend to angle and then need to be restarted or they don't go in) so perhaps someone holding the parts straight while another drives the screws (I did alone and it just takes patience)Coating good and other than getting the screws to drive straight, the holes were all lining up, etc.Material seems sturdy enough without making the full assembly weigh alot.Have 8 jackets (mid and light weight) and 3 hats on it, now.