Review on Enhance Your Water Quality with CULLIGAN US DC3 Connect Premium Filtration by Robert Dabney

This device is a must-have if you currently buy bottled water or use a filter that mounts to your faucet (like Pur). Very easy to install (just a drill). , screwdriver and crescent wrench) and for maintenance. And the convenience of having HIGH FLOW filtered water right at your kitchen sink is a game changer. Feel where I come from. This will take forever! However, technically, this device can be installed wherever there is a cold water tap. Not just in your kitchen. The advantage (and possibly disadvantage) is that the cold water comes out of the tap already filtered. The filter block installs under your sink and is in-line with the cold water supply (your hot water line is not connected to it). Block.). This way your water will be filtered when the tap gets cold. Why I say one possible downside is that there is no control over the flow of filtered water (like you might have on a Pur-style block via an on/off lever). Whether you're filling a drinking glass or washing dishes, it's done with filtered water. Although these filters last 12 months or 4750 gallons. So you get a certain amount of mileage from one cartridge. If water is important to you, you will definitely save money if you currently use the faucet installed filters that only last 2-3 months or 100 gallons. An "early warning" system (like the little indicator you have on your fridge filter or the filters on your Pur faucet). Therefore, you must track filter changes manually. Of course, when you're measuring in gallons rather than months, things can get a bit tricky. To do this, you need to keep track of your tap water usage (FYI, the kitchen faucet uses 2.2 GPM). Cartridge. The mounting kit is easy to install and the instructions are clear. This entire system can be installed in about 30-45 minutes (including placement of all your parts, documentation review and physical installation). After the installation is complete. , just turn on cold water for 10 minutes (to rinse the cartridge) and you're done. Cartridges can be easily replaced WITHOUT disconnecting the water lines. All in all, it's an incredibly convenient, affordable, and quick way to get filtered water straight from the tap. filters installed at the sink or waiting 5 minutes at the fridge to fill a 64 ounce water bottle!