Review on 📷 Neewer Camera Lens Vise Repair Tool for Lens and Filter, Adjustable Ring Range from 27mm to 130mm, Durable Steel Construction by Flavio Iyer

Repair tool for dented or out-of-round filter threads. They all have a universal standard thread pitch of 0.75mm (for sizes within the tooling range). However, the jaws of the tool have a pitch of 1.0mm, not 0.75mm. As a result, the jaws do not properly engage the thread being repaired, effectively causing further damage to the lens. Also, my unit arrived with loose parts due to poor assembly. The guide rods were not fully threaded into the fixed jaw and the set screws that hold the ends of the rods in the nutplate were loose. The picker seems to be doing it. I still smeared red thread sealant onto the threads _on_top_ of the bolts (rather than the threads themselves). The parts appear to be reasonably well made, but the build and quality control is lacking. If they corrected the thread pitch of the jaws (a trivial machine adjustment) and spent a few more seconds getting the assembly right, this could be a great product. In this form, it causes additional damage to the lens that is even more difficult to repair. I do not recommend this. If they corrected the thread pitch of the jaws (a trivial machine adjustment) and spent a few more seconds getting the assembly right, this could be a great product. In this form, it causes additional damage to the lens that is even more difficult to repair. I do not recommend this. If they corrected the thread pitch of the jaws (a trivial machine adjustment) and spent a few more seconds getting the assembly right, this could be a great product. In this form, it causes additional damage to the lens that is even more difficult to repair. I do not recommend this.