Well they say this is an extruder replacement and upgrade for Anycubic I3 Mega-S. It is not! With the Mega-S, the extruder gears initially rotate backwards. So I decided to install it on one of my Ender-3 Pro, didn't help at all. In fact, my prints have deteriorated. Then, with no direction, I had to take a longer screw and then cut off part of it to allow the arm-mounted spring guide to attach to the arm. The gear ratio for this extruder should be too high/too fast for Anycubic. It sounds and slips like the nozzle is stuck. I also changed my hotend so I had to check that as well. To test my new hotend, I had to use the Clear Thread function. Did that and that's when I saw the gliding thread. It didn't work with my Creality Ender, so it's safe to assume it doesn't work with CR10 printers either. With Creality printers, I found that the gear ratio was "too slow" for Creality printers. I got print layers that didn't stick. The bottom layers were great, but as the pressure progressed to the top, the layers wouldn't stick and there were gaps. I removed this extruder and installed the previous one and there were no more printing problems. So I did my best, installed this and tested it with two of the most popular mid-range printers, and this item either didn't work as advertised or printed insanely worse. Oh yeah, it just didn't work.
Iverntech NEMA 17 Stepper Motor With Integrated 350Mm T8 Lead Screw: The Ultimate Solution For Precise Z Axis Movement In 3D Printing And CNC Machining
6 Review
10Mm X 11Mm Black Plastic Open Type Cable Wire Carrier Drag Chain Towline R18 For 3D Printer And CNC Machines - 1 Meter Length
7 Review
Pack Of 5 TMC2208 Stepper Motor Drivers For 3D Printers, DORHEA V1.2 Module With Heat Sink And Screwdriver For RepRap, RAMPS1.4, MKS, Prusa I3, Ender-3 Pro Controller Boards
19 Review
BIGTREETECH TFT35 V3.0.1 Graphic Smart Display Controller Board For 3D Printer Ramps 1.4 RepRap 3D Printer Can Select Two Work Modes
13 Review
UV Curing Standard Photopolymer Printer by IFUN
5 Review
High-Precision And Stable Creality Ender 3 V2 3D Printer With New UI, Silent Mainboard, Effortless Filament Feed-In, XY-Axis Tensioner, Resume Printing, And Large Build Volume Of 220×220×250Mm
11 Review
🖨️ ANYCUBIC Assembled Innovation Off Line Printing: Streamline Your Printing Process with Cutting-Edge Technology
5 Review
Flashforge Adventurer 3D Printer with Detachable Precision Leveling System
6 Review