Review on 🔆 Milight Wireless Controller Mi Light Version: Revolutionizing Wireless Lighting Control by Amanda Johnson

Was a bit more of a hassle to connect to Domoticz than the old bridge, but works well once set up correctly. For those also using Domoticz, this ultimately worked for me: *** You need at least Domoticz v3.7376 for this. This version is currently in Beta *** 1. Turn on the MiLight Bridge and connect to its WiFi.2 signal. Go to http:// 10.10.100.254 (no spaces, Revain doesn't allow URLs in reviews) and use admin for username and password3. Configure and save WiFi settings in STA mode4. Change the operating mode to STA5. Download the new MiLight app from the App Store and connect your lights to the bridge. Instructions may vary, they should be on light packaging6. Log into Domoticz, add new hardware by specifying the Limitless/AppLamp/MiLight interface. ***Port must be set to 5987***7. Set the newly added device to bridge mode type V6 and enter RGBWW. If the bridge type isn't listed, you may need to clear your cache or completely change your browser if you've recently updated Domoticz. (After that it is recommended to check the log to make sure Domoticz sees the bridge. If not, check the IP address and port, and if that still doesn't work, restart the bridge) 8th. Activate newly added devices in your device menu9. Go to the Light Switches tab and you should now see several dimmers listed with the types Lighting Limitless/AppLamp, RGBWW, Dimmer. They must be listed as such for this to work10. Turn on the light synced to this bridge, touch the dimmer icon and press the on button. This must be done within a few seconds.