Review on 🌈 65.6ft LED Strip Lights (2 Rolls of 32.8ft each) RGB Light Strips with 44 Key IR Remote, 5050 SMD Color Changing LED Tape Lights Flexible Kit Controller for Kitchen Home Party by Joseph Rasmussen

They were easy to install but there were a few problems: 1. If you connect all four strips together and then connect the end to the white connector, only TWO of the four stripes light up.2. You must connect at least two connectors to the white box as the connector to the box determines which ones light up3. I had to buy extra connectors to connect to the end of the cable so I could connect two of these to the box.4. The remote doesn't seem to work out of the box either. You remove the plastic and some of the lights aren't the same color as what you're pressing on the remote and turning on and off doesn't work right away. 5. Remote comes with instructions and user manual6. There are no instructions for installing LED strips. I suspect they think you can wall mount and plug them in, but if there is a problem with them not working afterwards, there are no troubleshooting instructions etc. Who sells a product without instructions or information? I set it to start and end behind the TV. I'm not sure if there really is 65ft of light as we measured the room 3 times prior to purchase and we were two feet from a room that should only have had 60ft of light. Very frustrating. This is another reason we had to order a connector as we need to order 16 more feet of light to cover just 2 feet. Decided to just not have a light in those two feet and use a plug so I can connect to a white four nozzle junction box (not sure what it's called).