Review on ⚙️ FIRSTINFO Light Windscreen Wiper Arm Removal Tool (Opening Dimension: 0.59 Inch / 15.2mm) Internal Height: Approximately 1.06" / 27.2mm by Harald Patterson

I have a 2005 Audi Quattro and had to remove the wipers to clean the air chamber. Unfortunately, most of these tools are too tall to fit under the wiper closest to the hood hinge. I dared and it worked great. A few tips: 1. Use the wiper nut to guide and lock the tool bolt into the top of the wiper bolt. Without removing it completely, loosen the nut as much as possible, leaving a thread. Without removing the nut, center the tool bolt in it. this prevents slipping off the threaded rod.2. Use pliers. If you have the same ones I have, you won't get away without a fight. There is a chance that you cannot rotate the handle by hand. Even if you're a bad grip guy. :)) I'm a female and used real pliers to gently twist the handle until the wiper arm was under the nut. Then I unscrewed the nut and he was able to pry off the wiper. You might need a little extra help from the tool. I had to do this procedure 3 times within 1 week [this is AUDI, don't ask :)] and the tool is still in new condition. .Another tip: You have published the corresponding tool sizes. Please measure your items before ordering. Giving a negative review because you ordered the wrong size tool is hardly fair.