Review on 🔪 Stainless Steel PerfectPrime PT1302 with Fixed Length by Chris Edgerton

So first of all the static pressure results are higher than the total pressure. How that possible is, I don't know. I checked the position and orientation of the pitot tube three times and used different gauges, but the results did not change: (Second, the value I read changes when I close and open another port, for example I put a static port in the meter and measured when the stagnant port is open I do the same when the stagnant port is closed and the reading increases Same thing happens with the stagnant reading When I close the tip of a non-measuring port, Both the static and dead weight measurements give exactly the same results. Let's assume, although I triple check the alignment and placement of the pitot tube ft, I'm putting it in wrong. How can the static measurements change when open and closed? See the dead weight port?, so I had to order another pitot tube and I wasted hours triple checking every component in the system. I have attached 4 photos showing my readings in these cases ayah: 1. Static reading when the stagnant port is closed.2. Static read when stagnant port is open.3. Read the stagnation when the static port is closed.4. Read stagnation with static port open.