Review on Hard Water Stain Remover with Drill Pads - Shower Door Cleaner by Bring It On Cleaner by Michael Eldridge

I've tried a few products to help remove buildup from our glass door and shower frame. I didn't succeed. After a lot of research and looking at the reviews here, I took the plunge and placed my order. The kit includes several pads and a velcro panel to keep them in place. The chuck on the plate did not fit my DeWalt Impact 12V tool. Not a big deal as I just switched to a 20v drill and tightened it on the drill. I started by following the instructions, dampening a white soft pad with some water and then applying the cleaning solution to the drill in light circles. pillow. Then I pressed the plate firmly against the glass and slowly began to work from left to right. I machined the door in 4 sections from top to bottom. I cleaned the section then used a damn cloth and cleaned the area then cleaned again to remove missing residue. After I finished the entire door, I rinsed it with Windex vinegar to remove any remaining marks. Finally, I applied Rain-X to the inside glass of the shower to allow the water to drain and leave less residue in the future. Allow 15 to 20 minutes to cure when adding Rain-X Preventative Water Repellent. Applying the cleaning solution to remove the deposits required some arm strength if only for the long time it took to get it right. . So don't be surprised if your hands get tired when you're done, depending on the weight of your drill or applicator. The bottom line is that this stuff does what it says on the tin. Very satisfied and highly recommended. My photos prove how well he does what he says. Looks brand new.