Review on Mount-It! Large Tilting TV Wall Mount Bracket - 42-80 Inch, 220 lb Capacity, VESA Compatible, Low Profile, Flat Screens by Alfredo Nosrac

I was looking for a solid one-piece mount that would support a 65" TV weighing about 70 pounds. It looks like a strong mount. Has been hanging on the wall for 2 weeks now and is holding the TV up well so far. The installation wasn't that difficult at all. I would recommend using a good spirit level though as it is a small magnetic spirit level that can move. Lots of hardware comes with it. You must be able to find screws and bolts for most types of TVs. However, I needed an M8 50mm, and the package only contained an M8 40. That solved the appeal to the equipment. I would also prefer a pull lock/unlock mechanism rather than the screw on the bottom which is difficult to get out once the TV is installed. One annoying downside: the tilt adjustment screws don't seem to keep the TV at the desired angle for too long. After a while, the screw will loosen and the TV will slowly begin to tilt down. So far I've tightened (actually tightened) the bolts 3-4 times on both sides to no avail. As a temporary solution, I attached a piece of styrofoam between the TV and the wall to hold it in place. I plan to use a washer with screw, but to do this I need to disassemble the TV as the tilt screw is also difficult to access. Overall, I would still recommend this mount for its durability, ease of installation, and the hardware that comes with it. .