Included bits are 1/2 inch long. I bought this kit and went to an industrial stocked house online and bought 7/8 inch inserts. It's very important that the hole and threads are straight, so I used a head with several screws as a guide for the drill that goes into the head. Then I drilled through a 1" piece of plastic with the same bit and used the included tap to remove the threads on the drill press. First, attach the plastic to the table of the drill press. Start the faucet and slowly lower it .Into the plastic without cutting it.The resulting hole fits snugly to allow the tap to be oriented square to the block.Press the plastic block over the hole and tap.
π§ Restore Threads with AB Tools M12 x 1.5mm Thread Repair Kit/Helicoil - 15pc Set (AN046)
11 Review
40000 Lumens LED Bulbs Combo - SEALIGHT X2 H11/H9/H8 Low Beam 9005/HB3 High Beam, 6500K Cool White Halogen Replacement Kit
11 Review
π‘ Helicoil 5521-5 5/16-18 Inch Coarse Thread Repair Kit: The Ultimate Solution for Thread Repair
10 Review
π§ HeliCoil Helicoil 5546-6: High-Quality Metric Coarse Thread Repair System
10 Review