Header banner
Revain logoHome Page
πŸ”§ helicoil 5521-7 thread repair kit: restoring coarse 7/16-14 inch threads with precision logo

πŸ”§ Helicoil 5521-7 Thread Repair Kit: Restoring Coarse 7/16-14 Inch Threads with Precision Review

6

Β·

Average

Revainrating 3.5 out of 5Β Β 
RatingΒ 
3.3
πŸͺ› Thread Repair Kits, πŸ”§ Automotive Tools & Equipment

View on AmazonView on Π―M

Media

(1)
img 1 attached to πŸ”§ Helicoil 5521-7 Thread Repair Kit: Restoring Coarse 7/16-14 Inch Threads with Precision

Description of πŸ”§ Helicoil 5521-7 Thread Repair Kit: Restoring Coarse 7/16-14 Inch Threads with Precision

This are highly durable. This is manufactured in China. This are woodworking project kit. Package Dimensions: 21.082 L x 4.064 H x 6.604 W (centimeters).

Reviews

Global ratings 6
  • 5
    2
  • 4
    2
  • 3
    0
  • 2
    0
  • 1
    2

Type of review

Revainrating 1 out of 5

It is NOT a 7/16-14 final thread size when finished.

This is not a 7/16-14 fine thread size. My existing 7/16-14 cap screw for attaching the thermostat housing to the intake manifold on a Chevy V-8 is 7/16-14. And hits right in the spiral coil. Doesn't grab or hold. Attention buyers. I stripped the threads on the original factory tapped hole so it's my fault, but now with this helical insert that isn't a 7/16-14 thread I have to replace the manifold for 200+. plus my time

Pros
  • This is very strong
Cons
  • poorly designed

Revainrating 5 out of 5

Works well for a shear bolt in a block

Included bits are 1/2 inch long. I bought this kit and went to an industrial stocked house online and bought 7/8 inch inserts. It's very important that the hole and threads are straight, so I used a head with several screws as a guide for the drill that goes into the head. Then I drilled through a 1" piece of plastic with the same bit and used the included tap to remove the threads on the drill press. First, attach the plastic to the table of the drill press. Start the faucet and slowly lower…

Pros
  • Package dimensions: 21.082L x 4.064H x 6.604W (cm)
Cons
  • Not the best

Revainrating 4 out of 5

Great kit for fitting cleaned aluminum bolt holes

I bought this helicoil insert kit to repair some aluminum bolt holes I cut in the gear case. In general the kit works great, no complaints. This kit proved to be much stronger than I thought it would be and allowed me to tighten the bolt to spec with no issues. I would recommend this kit to anyone looking to repair stripped threads and would recommend the regular use of cutting lubricant when cutting new threads. The drill bit is not included and in this case finding a 29/64 drill bit is not…

Pros
  • This is a woodworking kit
Cons
  • Negative impression

Revainrating 1 out of 5

It is NOT a 7/16-14 final thread size when finished.

This is not a 7/16-14 fine thread size. My existing 7/16-14 cap screw for attaching the thermostat housing to the intake manifold on a Chevy V-8 is 7/16-14. And hits right in the spiral coil. Doesn't grab or hold. Attention buyers. I stripped the threads on the original factory tapped hole so it's my fault, but now with this coiled insert that isn't a 7/16-14 thread I have to replace the manifold for 200+. plus my time

Pros
  • This is a woodworking set
Cons
  • Very expensive

Revainrating 5 out of 5

Works well for a shear bolt in a block

The included inserts are 1/2 inch long. I bought this kit and went to an online hardware store and bought a 7/8 inch insert. It's very important that the hole and threads are straight, so I used a head with several screws as a guide for the drill that goes into the head. Then I drilled through a 1" piece of plastic with the same drill bit and used the included tap to remove the threads on the power drill. First, attach the plastic to the drill press table. Start the faucet and slowly lower it…

Pros
  • This is very strong
Cons
  • Not fancy

Revainrating 4 out of 5

Great kit for fitting cleaned aluminum bolt holes

I bought this set of helicoil inserts to repair some of the aluminum bolt holes I cut in the bell housing. In general the kit works great, no complaints. This kit proved to be much stronger than I thought it would be and allowed me to tighten the bolt to spec with no issues. I would recommend this kit to anyone looking to repair stripped threads and would recommend regular use of cutting lubricant when cutting new threads. The drill bit is not included and in this case finding a 29/64 drill bit

Pros
  • Made in China
Cons
  • Damaged