Review on Easy Installation Kit: Unity 189 Driver Side Post-Mount Spotlight for Dodge RAM by Chris Reeves

This kit worked well on a 2003 Ford Focus. You can check the Unity USA website to see which kit will work for your vehicle. The kit includes dozens of paper patterns for different vehicles. They cut out the matching template and glued it to Pillar A. The template I needed was not included, but I contacted Unity through their website and they quickly emailed me a PDF of the matching template for me to print out . To install, fit the template to your A-pillar. Remove the inner lining and make sure that there are no cables, airbags, etc. in the drill path. Reinstall the inner panel. Use a hole punch on the template to make indentations where the screw holes will go, drill the screw holes and install the chromed metal piece with the gasket underneath. Then temporarily install the metal grommet before drilling a half-inch hole through the A-pillar and inner panel. Keep the drill bit flush with the bushing while you drill a nice straight hole in the vehicle interior. They need half an inch a little longer than you think! Mine was too short, but I was able to find a foot long drill bit from my local hardware store to finish the job. Consider using masking tape on the car's paintwork when drilling to prevent chipping. Once installed, the kit is securely in place and ready to receive the headlight.