Review on 🔧 ATP Automotive 106007 Intake Manifold for Engine Optimization by Elijah Harvey

Would definitely pay more money for Dorman in the future! when to start 1. It did not connect to my 2008 Crown vic POLICE. The coolant transition on this manifold has 2 threaded holes. I'm assuming 1 is for screwing in the sensor and the plug provided is for plugging an unused hole? OK there are no sensor holes in my manifold so I had to drive 31 miles to get a second sensor. hole plug! Second, as stated in another review, the bolts from the original fuel rail could not be used to reconnect the fuel rail from the start! When replacing the holes were not drilled deep enough. My mechanic had to cut the holes deeper and still had to use 3/16 washers to shorten the bolts. The third time he tried to install the throttle body assembly, he encountered the same damn problem. He had to remove the throttle body and TIGHTEN the body mounting holes deeper to use the original mounting bolts. So get ready! for modifications if you plan to use this on a 2008 Police Crown Vic. If yours doesn't have a coolant passage sensor, it's better to buy the 2nd one. Connect before you start!