Review on 🔄 10-Pack 4.5-inch Replacement Disc for Paint and Rust Removal/Stripping by Aaron Johnson

I've always used wire brushes to remove rust and paint and I needed to be told that they are life changing. They do a good job of removing rust, but they do the best job of removing paint. I used an old truck angle grinder with them which is probably close to a 3 amp motor. What really impressed me is that they are not so bogged down that they reduce efficiency so I would say that if you have a coffee grinder with enough power it will work great as the ones I have used is probably one of the weakest. receive. In terms of durability, they feel good off the edges. Edge grinding promotes faster stock removal. The abrasive is like a rubber sponge coated with ceramic particles, so they have the advantage of being relatively safe to use in two ways. The material ejected from the grinder consists only of rubber and dust. So if you need to remove the protection, you don't have to worry as much about throwing sand or wires around, which can be painful. Second, when they eat through the paint they do little to no damage to the base metal. I also like their flexibility which helps with uneven surfaces. In truth, these wheels did such a good job removing multiple layers of paint from old body panels and I was so impressed with their performance that I decided to write a review.