Review on 💡 Conair Round Makeup Mirror Replacement: T4 12W 6400K Circular Fluorescent Bulb, 5.5-Inch Diameter by Dan West

I checked both new bulbs before installation, they worked and were bright. They fit my Conair BE122. While removing the old lightbulb and installing the new lightbulb takes a little time and extra care not to damage it, it is a very simple and straightforward process. The hardest part was separating the sides of the mirror so you could even see the lightbulb. Unplug everything, unscrew the sides of the mirror and spread the sides of the mirror apart. I used a small flat head screwdriver as a lever. Next, carefully unclip the four oval plastic clips in the center, slowly pull the bulb out of each holder and pull off the old bulb. The photo shows two clips taken from the lightbulb. Then slowly insert a new bulb into each socket, push in and snap the clips back into place. Screw the sides of the mirror together and you're done! Not sure how long these new bulbs will last, but the old one lasted many years.