Review on 🚤 Green 12V 5m (16.4ft) Seaponer Pontoon Boat Light Strip - Marine LED Flex Lighting for Duck Jon Bass Boat Sailboat Kayak - Boat Deck Accent & Interior Lights - Fishing Courtesy Light by Kenneth Bryan

They don't hold up that well. I've cleaned slick areas just under the bumper on the sides of my boat with rubbing alcohol and then applied them and they don't stick very well. I would suggest additional third party glue. They're beautiful, bright, and don't use a lot of battery. Schools of herring immediately appeared around me, which made collecting the bait easier. I throw green dive lights on top of turning it on and it works like magic. I drilled a hole on the back of the ledge that is well behind the tail. Then I twisted my wires into a short braid that stuck out from the lanterns. I fed the fishing line into the boat and found it, then pulled the wire I needed to get to the switch on the center console, then filled the hole with resin to reseal it. I didn't want to use all of those little clips to poke a bunch of holes in the boat, but I installed one each on the front and back edges of the lightbar, where they were more likely to come loose.