Review on 🔑 KeylessOption Key Fob Transmitter: 2 Replacement Remote Control Clickers - Black by Juan Simpson

These fobs work great on my 2005 Ford Focus. The instructions are a little disorganized, but I finally found a YouTube video with the correct instructions and was able to code both at the same time. Below are the instructions. Ford Focus 2000-2007: 1. Make sure all doors are closed and your leg is not broken.2. Buckle up (driver's side).3. Insert the key into the ignition switch and turn it to the on and off position 4 times.**4. The fourth time, you should hear the car ping when the key is in the off position.5. Press the lock button on one fob that beeps and do the same on the second.6. After you have programmed both fobs, turn the key to the on position for approximately 2 seconds.7. The vehicle is now out of programming mode and you can check the key fobs.** = The positions ON and OFF mean just before the engine starts. DO NOT start the engine. Off > On > Off is a complete cycle. For 2008 and newer, do this 8 times instead of 4.