The only reason I decided to write is because several of the remarks about the installation were lacking. 1. Each and every new batch includes both angled and straight brackets. 2. This arrangement is not a marriage; it is a feature))) Engineers from Zalman Korea discovered that doing so improves the pressure on the processor. 3. The installation procedure is quite easy to carry out as described below. a. Coat the inside of the processor with thermal paste. Put down the ice chest. b. Tilt the cooler ever-so-slightly toward one of the mounts so that the bolt can engage the mount, and then turn the bolt one full revolution clockwise. After letting go of the cooler, which will cause it to drop itself due to its own weight, press the opposite tab diagonally with your finger next to the bolt closer to the base, then tighten the bolt one turn, etc. etc. etc. Turn the diagonally opposite corner twice. d. turn all the way around. Have no apprehensions. e. the installation went off without a hitch at all. Raise your arms up to your shoulders. Moreover, you should under no circumstances remove the stock backplate because the cooler is quite heavy and the Zalmanovsky is engineered to withstand the strain because it springs.
M.2 Screw Kit: Easy Mounting for NVMe SSDs on ASUS Motherboards
19 Review
🔧 Premium Repair Replacement Screws & Tools for MacBook Pro Retina 15"/13" - Complete Bottom Case Set
10 Review
uxcell 3.5" HDD Screw Black 200pcs for Computer PC Case - Flat Phillips Head - 6#-32 - Hard Drive Fasteners
10 Review
36-Pack Black Rubber PC CPU/Case Fan Screws/Rivets Set for Computer
11 Review