Review on Modern Metal Futon Frame: DHP Vermont, Classic Design, Full Size - Black by Bethany Baker

The frame seems pretty solid but I haven't used it much as it took 6 hours to assemble. Here are some tips: You will need a drill and a set of bits. Much of the assembly requires the screws to be driven hard into holes in unthreaded metal. These must be pre-drilled with a drill, otherwise the screw heads will tear off. You'll also need pretty good arm and hand strength. You will need a set of Allen keys. Two are provided because you need both at the same time in one step. They are very soft metal and will round off and become unusable before you are done with the assembly. Some of the holes in the metal tube are punched out and there may still be pieces of tube in the tube that will block the passage of the screws. It's easy to bend the tube with a screwdriver once you figure out what's going on.