Review on Wallscapes GL9020CLKIT Glacier Clear Glass by Kantrel Tunstill

I love the design of these floating shelves. A very good quality. I installed three 4" and two 2" models. I figured out the installation process on the third one as the instructions aren't very detailed. (Minus half a star) I drilled holes in the bracket to put two screws in the wall plugs. Pre-drilled holes don't always line up. Twisting anchors is good for drywall, but doesn't work with panels. Other insert-type anchors tend to twist or overstretch and not tighten. (Minus half a star) The double-sided tape should run about 3/4 along the back edge of the glass shelf and the rest of the tape should be on top of the shelf. The instructions are not clear on this. If the tape is only on top, everything won't go under the bracket. After sticking the tape on the shelf, insert the shelf into the bracket by lifting the front part at an angle of about 30-45°. Press the shelf firmly against the back of the bracket, then lower the front. If the screws are not tight, the shelf will not move far enough.