Review on 🔑 Genuine ACDelco GM 16245103 Keyless Entry Remote Key Fob - 3 Button for Superior Performance by Matt Norwood

Very satisfied. Works just like the original! It's just a little difficult to program, but worth it. What I did: Note. Existing keyless fobs will be erased by this procedure. Existing work consoles must also be reprogrammed.1. Locate the programming connector wire located on the upper right side of the carpet in the trunk. You will need to pull back the right side trunk trim panel at the top of the trunk wall to find the single black and white wire.2. The programming port cable must have a connector in the plastic connector at the end of the black and white wire. Ground the clip in the connector to the nearest screw or trunk latch. Keep the connection cable grounded throughout the process. (I turned the ignition key to the "ON" position (NOT working)) 3. The system will now automatically lock and unlock the doors, indicating that programming mode has been activated.4. Simultaneously press the lock and unlock buttons on the keyless remote. HOLD ABOUT 20+ SECONDS for the system to respond by locking and unlocking the doors once to indicate successful programming.5. Repeat step 4 to program additional keyless fobs, including existing keyless fobs. Do not remove the ground wire between programming keyless remotes.6. Disconnect the programming connector cable from ground to exit programming mode.7. Test the keyless remote(s)