Review on 💡 Enhance Your Lighting Setup with 4 Pin RGB LED Strip Connectors 10mm Set and AWSOM RGB LED Strip Extension Cable Wire by Justin Sherman

Easy to recommend. The price was right. The delivery was fast (premium). This solved the problem. An extension cord for the LED strip terminals was just what I needed to solve my poor soldering skill problem. However, I will say that they were not fully protected by ID10t. It took 2 tries to figure out that the easiest way is to use the real-time circuit; as opposed to assembling it on a workbench and transporting it to the installation site. Open the retaining clips wide, disconnect the extension cord about 3/4 inch, press each cord into its groove with your thumb, and then press the retaining clip. Then LED strips. Cut along the cutting line, do not remove the impregnation, open the clamp to see the pins of the conductor clearly, align the tape - here the tensioned chain will help. up, press the retaining clip. Note: A bad connection on the extension cord side can also cause 1 or all colors to not work. Be patient. Be ready to open and try again. Enjoy! I have not tried self-adhesive mounting clips in my application.