Review on 🎮 Apevia ENZO-PK Mid Tower Gaming Case: Tempered Glass, USB3.0/USB2.0/Audio Ports, Pink Frame by Christopher Bacho

UPDATE (with pictures): Luckily my 12x9 mainboard fits. but hardly! There can be an inch between the bottom of my mobo and the shelf that separates the top of the case from the power supply. Do not buy a motherboard longer than 12" if you want to buy this case! At least apart from the fact that I had no problems with the case. Easy enough to embed and route cables. Front, one side natural glass, held in place by 4 large screws that easily loosen or screw on by hand - the other side is held in by 2 same sized screws on the back and then snapped into place. You have to slide the prongs through the holes to get it out and to reattach it just slide the prongs back through the holes. A little easier said than done, but if you use the back end of a screwdriver, you can do it without killing your fingers. Just be careful not to break the prongs! Nice case! Just arrived so I'll update the review with pictures later. My main concern is whether the motherboard will fit or not as the listing says it will fit an 11x12 motherboard and I ordered a 12x9. This case advertises that it is suitable for ATX, Mini-ATX and Micro-ITX, but every ATX motherboard I've looked at is 12" or larger :/ I'll let you know how in a few days it works i have all my pieces.