Review on Computer chair Metta Samurai S-3.04 for executive, upholstery: textile, color: black by Barbara Koscienek ᠌
The product does not correspond to the description, poor quality.
Development is good. A poor showing overall. Not only did I not utilize it, but I also did not remove the stickers. I didn't even bother to complete it. Never sat down. To prevent the chair from creaking, the metal parts that came into contact with one another were lubricated with high-quality grease. The chair was delivered to me by a different courier, who informed me that the retailer did not open the packing. According to what I've seen, these chairs are stacked up in the factory to such a degree that the quality control department is unable to keep up with the workload; therefore, more workers are required. The 2022 facility of a well-known Swedish-Dutch company suffers from the same issue, despite the fact that inspections from other countries can occur as frequently as once per week. Additionally, they do not report the specifics. And then, regardless of what occurs. What exactly are some things that we may state regarding the METTA plant? However, that is not a valid reason. Why are prices so much lower at ONLINE TRADE.RU compared to those charged by the manufacturer? It dawned on me right away what might be causing this problem, but customers are purchasing items from that location, the quantity of available seats is diminishing, and there was a popular movie uploaded to YouTube. I gambled with my money and made the purchase, thus that's the outcome of the risk. There is no doubt that miracles take place. Not so with "you," though. ONLINE TRADE. RU has, up to this point, gone out of its way to meet me under the guarantee, but things have not gone smoothly. I asked if I might switch seats, but instead of directly rejecting my request, they filed a formal complaint. In the nick of time, it became clear that the seat would not be replaced, nor would it be mended; rather, they would take away the entire chair, and they would not even change it completely because it had been taken off the market. However, the manufacturing facility ought to still be producing them, considering the fifth series of chairs has not yet been released, right? I'm not sure why the complaint store is unable to place an order. As soon as the courier comes to pick up the chair, you should draft a transfer act and make two copies of it. The act should state that the money should be returned to the point of issuance, just as the courier promised. Obviously, he is still young, always in a rush, and prone to making mistakes in the transmitter. Furthermore, he does not have any spare forms. We have forwarded him a request for fresh forms, which should arrive the following day. Despite the fact that I did not immediately respond to the manager on the ONLINE TRADE. RU website, all of this has been going on for a month. I'm still interested in buying this chair. If someone appreciates the idea behind the product, it is worth taking the risk to buy it, but they should do it in a business that won't back down and offer a guarantee. In a nutshell, in the same way. However, there is a tape measure and a pair of rag-lined technical gloves included in the box.
- On gaming seats, there are adjustable supports (under the head and lower back), which replace the foolish and cumbersome pads that were formerly there. Under the lower back, it is adjusted in height as well as depth by approximately 2.5 centimeters, both upward and downward. - A new, more reliable lumbar support system has taken the place of the older, less reliable one that was in existence. It appears to be more trustworthy. - The headrest may now be manually adjusted without the need of hexagonal knobs thanks to the introduction of circular knobs. - Sweat will not cause pants and a shirt to stay together, and during the summer in St. Petersburg, this was the case even with an ordinary chair. - I got it through the ONLINE TRADE. RU: an armchair for 17,480, mind you, and that's without a discount on the current price (which is 22,149), and shipping for 250 (which is 2,439 at the plant itself). Cheap, although I glanced at the cheapest ergonomic chair available from 45,000 dollars for a moment. a significant discount compared to the usual game ones, which often cost around 30,000. begin, judging by the amount of unfavorable reviews and the content of the reviews. And here is a chair that has multi-block armrests, as opposed to a fragile top gun, as well as four-way armrests. The plant indicates that there is a change in the stiffness of the mesh, but in reality, the way that is stated in the instructions is a slope. It appears that (although though it is not specified in the instructions), you are able to entirely unscrew four screws, which, by utilizing two plates, press the mesh against the frame with tension, causing the seat mesh to droop like a hammock. This may be done by totally removing the screws. It is possible for you to change the mesh on the seat on your own. - I glanced at the diagonal cut, and it appears that the thickness of the frame metal is greater than 1 mm. Perhaps this optically adds thickness to the appearance of the frame. An iron plate of the multiblock can be found positioned directly above the gas lift. If he is successful in blowing it up, perhaps the plate will shield him from the explosion. - gas lift of the fourth class. Although the factory applies a white-clear grease, I was able to find locations where I could add it. - It was discovered that the armrests on top are not made of plastic, but rather have a slight give to them. - The maker also outlines some of the product's additional benefits.
- - Two 5 mm hexagons were not included, despite the fact that they are listed in the inventory. The stock is denoted by the designation S-3.03. In addition, the terms of the guarantee require that you send back the full set. Is this a dodge on the part of the factory to avoid taking responsibility? - During the assembly process, I discovered that the seat mesh had two thread breaks. Subtle, but essential components of the whole. akin to emotional breakdowns. A colored fiber, which looks like a ribbon of thin fibers running parallel to one another, and a black fiber, which looks like a thin wire made of shiny plastic, are both torn in the same location. At another location, only the colorful fiber that was resting on the remaining extreme "hairs" was ripped, and it was not fully, but precisely in the midst of this ribbon that was composed of threads of "hairs." Just a hole; there's no extra material like there is when a rope breaks. It is possible that a worker at the plant smoked over the seat, that sparks from welding or some kind of file got into it, or that both of these things happened. And when there are holes, the weaving extends out under the force of its own strain; I never once sat down while I was doing this. When I bought the chair, there was a sticker on the seat that identified the color as "maroon," despite the fact that it was actually a dark brown color that matched well. Rigid mesh, almost like a stool; may this be an attempt by the factory to avoid taking responsibility? There is no change to the pillow case. - Although I'm not an expert on the subject, I find it extremely embarrassing that it contains a form of black plastic fiber. Although it was merely the color that made the flaw obvious, you can see that the hairs on the inversions into the chrome-plated frame of the rear are frizzy, as if they were caused by friction. - The mesh on the rear cannot be replaced in any way. It is held in place by being clamped in a metal plate that has the letter "q" or "G" twisted into it. The bottom edge of this plate is welded in a perpendicular fashion to the chrome rim, or more specifically, to the frame of the back itself. Welding has resulted in the creation of spots, and it appears that there is also a linear one. There are big gaps that have not been welded, and the paper can easily move through them. - The mechanism that provides support for the back is point-welded. The significance of thick metal is lost. - The usefulness of preventing the wheels from rolling backward when they are unloaded is questionable. Even though it wasn't completely built, the chair was moved many times by me. How do I, for example, vacuum the floor? - Some welds have golden patches. I have no idea what it could be. The distance between the seams appears to be typical. - When the height of the back support is adjusted, the collar of the back support rests against the bars.
New products
Comments (0)
Top products in 🪑 Home Office Furniture
Computer chair ThunderX3 TC3 gaming chair, upholstery: faux leather, color: Arctic White
59 Review
Computer Chair CH-330M Office Bureaucrat, Upholstery: Artificial Leather, Color: Grey-Blue
88 Review
Computer chair ThunderX3 TC3 gaming chair, upholstery: imitation leather, color: Ember Red
94 Review
Gaming chair Chairman GAME 15, upholstery: imitation leather, color: black/grey
95 Review
Another interesting products
Full Dark Copper Metal Bed Frame W/Headboard & Footboard - No Box Spring Needed!
45 Review
Sorbus Diamond Weave Room Divider: Extra Wide 6Ft. Tall Privacy Screen - 8 Panel Espresso Brown Foldable Partition Wall With Double Hinges
42 Review
Mattress Blue Sleep Hybrid 2.0, 80x200 cm, spring
46 Review
Sorbus Five-Drawer Dresser - Furniture Storage Tower For Bedroom, Hallway, Closet, And Office - Steel Frame With Wood Top And Easy-Pull Fabric Bins In Marble White With Black Finish
41 Review