Review on Motorcycle CNC Handlebar Kill Headlight Switch With Aluminium Alloy Push Button Indicator Green Light For 1&#34 by Tommy Russo

First of all I really like the derailleur and I have no problem with its wiring as my bike already has extra lighting. This is for the second amber safety light. The problem is the black cable jacket when sliding the solid aluminum case in and out - there's no strain relief, so it snapped off the case's sharp edge during installation. The 7/8 handlebar version is also very tight. , ie no tolerance on my bike is excluded. Once installed, there is no game that can be both good and bad. In my case this was bad as I tightened the bolts with small drops of a blue chain lock on the slightly curved part of the bike handle. When I found a broken wire and had to remove the switch, I struggled to remove the switch. next problem. The two small heads of the Phillips mounting bolts were quite flimsy, I removed the heads with a small portable multi tool to fit them in a tight spot around the bike. Steering wheel. Long story short, I had to remove the entire handlebar and drill out two small screws to remove the now-broken switch. At this point I put my hands up and I need to find a new switch.