Motorcycle CNC Handlebar Kill Headlight Switch With Aluminium Alloy Push Button Indicator Green Light For 1&#34 Review

As others have said the circuit has been broken and the fuse has blown. I connected the switch to the Nilight wiring harness and it worked great! The colors of the wire harness were red, black and white, so it became red (wire harness) - black (switch), white (wire harness) - blue (switch) and black (wire harness) - brown (switch). So the light on the switch only came on when the light was on. The wires to the switch were smaller than the wiring harness, so we'll see if there's a problem or…

After wiring my auxiliary lights to this switch and the wiring diagram shown on Revain, the switch lights up every time the wires are connected to the battery, regardless of the switch's position. I found that the vendor's schematic was wrong. Black goes to the plus of the battery, blue to the plus of the flashlight. With this connection, the backlight turns on only when the switch is on. This is the first time I see others having the same problem. ONE STAR for the seller who fails to correct…

I had to reconfigure the high/fog switch on my bike which was awkwardly mounted on one of the headlight housings. This meant I couldn't turn them on and off while on the bike. After I switched to LED the inside of the switch got in the way so I removed the original, bought and installed this new switch on the steering wheel and rewired accordingly. The switch light is bright enough to let you know if it's on or off even in direct sunlight (I bought the blue one). Looks great at night. The…

used on polaris atv for led lights i ordered 7/8 by mistake but found a bottleneck on the handlebar for fitting. Wired to control a relay that provides power for the lights. LED lights use less power, but this switch's wires are too thin to provide the power needed to connect directly to lights. This switch connects directly to the battery in case you need the light when the ATV engine is off, but connecting the ground wire keeps the lighted switch on 24/7, likely draining the battery. I can't…

First of all I really like the derailleur and I have no problem with its wiring as my bike already has extra lighting. This is for the second amber safety light. The problem is the black cable jacket when sliding the solid aluminum case in and out - there's no strain relief, so it snapped off the case's sharp edge during installation. The 7/8 handlebar version is also very tight. , ie no tolerance on my bike is excluded. Once installed, there is no game that can be both good and bad. In my case