Review on 💦 Danco 88760 Universal Fit Sink Spray Head: Efficient Chrome Design for Optimal Performance by Joshua Flake

Fairly easy to install. I had to remove a small metal retaining wire to remove the original atomizer (see pics - this is a normal part of the installation process but I'll add a note if it should be helpful). I used a small screwdriver to pry the clip and installation was easy. HOWEVER, the assembly began to leak immediately after installation when I used the rubber gasket that was provided. I say "leak" but it was actually more of a splatter (my shirt got wet) that formed right where the two parts of the kit bolted together. The gasket that comes with it is very thin and hard, so I suspect it's not airtight. To the right. I then attempted to replace the supplied gasket with the original gasket that I removed from an old broken atomizer. After that no more leakage. In the attached photos you can see the difference between the supplied gasket and the original gasket. The original gasket is thicker with a smaller hole. Even if you don't have the original gasket, I imagine it would be fairly easy to find a replacement at your local hardware store. All in all I don't regret it. purchase of this product. This required a bit of modification, but is becoming more and more common on cheap DIY products these days. I doubt there is a similar product at a similar price that is 100% reliable. I used this product in a rental apartment I was staying in. d say yes, but mention the warnings listed above.