Review on 🔩 Culligan UB-1 Mounting Bracket Kit, Including Screws by Eddie Man

This bracket was ordered to mount an Omni Corporation U25E water filter and it served the purpose well. (NOTE: The filter housing must be directly in the center of the bracket, otherwise the sides of the bracket may prevent the filter housing from fully screwing in and sealing). Bracket. To explain, before installing the water filter in my chosen location on the wall, I assembled the filter, bracket, and inlet/outlet pipes on my workbench. To do this, I first placed a bracket around the filter and then screwed the inlet and outlet pipes into the filter through the holes in the bracket. Slots on the back of the bracket allow the entire filter/piping assembly to be placed onto the wall screws and lowered into place - otherwise they would be very difficult to access. Unfortunately, the screws that came with it were so big that they didn't fit through the large holes in the bracket slots. Luckily I noticed this and was able to use slightly smaller screws and drill holes in the wall accordingly. The supplier must ensure that the supplied screws fit into the slots in the bracket.