Review on SUPERNIGHT Pieces Connector Extending Connection by Jake Hillyer

I used the connectors to attach the LEDs to the back of the TV. Stripes with contact points facing up. It took me several attempts before I finally got it right. But once I inserted the strip, everything worked fine. Labels for 5 pins (WBGR+) are printed on the connector. You can insert the LED strip backwards (+RGBW) and it works fine as long as the next section of the strip is ALSO inserted "backwards". So if you have a "+" symbol on your LED strip that matches a "W" symbol on one side of the connector, the LED strip you connect to the other end must also have a have a matching "+" symbol on the strip. with a "W" symbol on the plug. You can find some videos of people doing 90 degree turns by bending the LED strip instead of using the corner connectors. The strip I had didn't have enough space between the LEDs to do this. If I had to do it again though, I'd probably find a way to turn the corners by making a loose loop with the LED strip. I then used masking tape to attach the portion of the strip where the adhesive would not make contact with the back of the TV. Since this is all hidden behind the TV with the back against the wall, no one sees the protruding hinges.