Review on Kemimoto HeadLight Bulbs Compatible Honda by David Finley

Brighter White Light.NO. High beam and low beam back. On my 1993 Furtruck I have auxiliary headlights that switch to the high beam of the factory headlights. When positioned at the rear, my auxiliary lights come on when the switch is in the up position, but low beam. The control ring is crimped so it cannot be easily removed or rotated. You can't flip it unless you cut the tab and solder a new one in the correct position 180° from where it is now. You may be able to cut the entire ring off with a dremel and solder it in place. The headlight wiring on my quad had previously been cut and spliced so I was able to fix the high/low reversing by swapping the high/low lights. Wires on my Honda that turned out to be blue/white and green for ground. The beam of light isn't as focused as a factory bulb, and I had to turn the headlights down a few turns to try not to blind oncoming traffic. were the last bulbs I needed for a full LED conversion of my 93.300 Fourtrax. The shared photo shows a high beam comparison between the factory and this bulb.