Review on Computer chair Zombie DRIVER gaming, upholstery: imitation leather, color: black/red by Boguslawa Cielak (Ag ᠌

My height is 185. Weight 81. Despite the lack of height adjustment, the chair successfully fit my parameters and under my computer desk. Hands on the armrests lie comfortably for typing. I hope there will be no carpal tunnel syndrome. Right now I'm sitting, blindly typing these lines in an armchair. Maybe someone needs these tips: 1). Be careful with the cross. Edges are not processed. As a result, they are spicy (with leftovers of skewers). It is possible to injure your fingers when pulling out of the box and/or during assembly. 2). Insert the wheels by turning the crosspiece over and laying it on the floor, resting from top to bottom. Don't try on weight. It's very tight. 3). Attach the armrests to the chair back first. Bottom bolt first. Since the upper one is more difficult (the armrest does not allow turning 360). Having felt the thread, firmly press the armrest. Otherwise, the foam rubber will not allow to twist. four). Similarly, fasten the seat, firmly pressing the armrests. It is more difficult there, because there is more foam rubber. five). I removed the white piece from the bushing in the crosspiece. I hope it's right. 6). The top cushion can be turned over. If you are embarrassed by the inscription Zombie 7). Pillows move out quickly. You have to re-fix every time. In principle, with constant work with the keyboard, this is not critical. The main thing is that the 5th point is comfortable))) 8). Be sure to save the screw key for tightening the armrests. Useful when moving and for periodically tightening bolts PS. Nevertheless, spring washers at number 11 in the instructions are needed! Without them, the chair begins to creak after the first days of operation. I tightened the bolts. The creak is gone. I hope for a long time. But with the presence of washers-springs, this problem would probably not have arisen.