Review on 🚘 VIPMOTOZ Full LED Front Fender Side Marker Light Turn Signal Lamp Assembly Replacement For BMW E82 E88 E90 E91 E92 E93 E60 E61 E83, Dark Smoked Lens, Driver & Passenger Side by Serguei Mracek

Looks fantastic! E92 TiAg. I think everything is going well but it may be because the changes look impressive and after months or years I can say the same about the cleanliness 😀. They match 95%. They are slightly smaller than the standard bulbs so you can see the indentation (on my car the shape of the bulb is indented compared to the rest of the body). For those that fail, you'll need to push towards the front of the car after inserting the tail. I compared the hook to the original and they are the same size. For some reason the spring doesn't push the sheath forward far enough so you'll have to do it yourself and it will be so tight you can't pull it straight out. Nice and safe. I dry it first. Now the hardest part - how to stick double-sided tape? I installed one without removing the 3M protective film and it stays in place perfectly. The other one I tried to put on and it was too sticky. I tore it off very quickly, sprayed a lot of Vindex and quickly pushed it back (towards the back of the car) and in, then forward (towards the front of the car). Moved a little and stood up. clogged. Unfortunately it is a bit smaller than the original. So you can see the outline of the indent. What I had to do was slide backwards, inwards, forwards and up. It's good if the top fits perfectly and the bottom doesn't, because you can't see the indentation from below. You might find another solution that works. I got the Windex trick by adjusting the front lip. Still very sticky. Maybe because it's a vertical surface and the windshield slides off. Looks great. Is working. A little pricey for something that has already worked, but it's cheaper than others that cost 40-60% more. I thought about being consistent, but that's ok. Much luck!