Review on Home Computer Case AeroCool Evo Mini Black by Hien Quang ᠌

1. Before starting the assembly, it is necessary to fasten 2 hexagons for the extreme screws of the Micro-ATX board (they lie separately in a bag) and unscrew the case fan from the back wall, there should not be anything in the case except for the power supply and the mother, it is better not to install a processor cooler, everything is very tight. power cables interfere. 2. You can actually put only 1 HDD (side) and 1 SDD (bottom) into the case, in principle it is impossible to put an HDD in a regular place at the bottom, it completely covers the video card cooler, I have it screwed in with 1 screw in the place under the SDD and then it blocks half of the vidyuhi , it's better not to do that) 3. My SATA ports run parallel to the base, because of this I had to cut a hole in the front panel, otherwise the cables simply cannot be inserted, since there is a lot of space under the front panel, you can hide a lot of things there. 4. It is impossible to insert a large fan into the front panel, I have a cable for USB 3.0 under it, but even without it, the power cables of the vidyuhi and the hard drive will interfere. I screwed a small one by 60 mm on the twists, it is not yet in the photo.