This is an excellent filter for removing iron solids and other debris from well water. It can be used in combination with the Pentek RFFEE20-BB filter, which can remove diluted iron and hydrogen sulfide from water. We use these two filters in a downhole system and install the DGD 5005 and RFFE20-BB after the accumulator but before the water heater - the installation order is accumulator, then DGD-5005, then RFFE20-BB, then water heater. In our setup, these filters remove approximately 4ppm of iron from the water: 2ppm as solids and 2ppm as diluted iron. In our application, they need to be replaced about every 3-4 months. Since these are mechanical filters, the water pressure will gradually drop as they fill up with iron and other debris. Filters should be changed when either the water pressure and water flow drop to a level that bothers you, or when you start noticing iron in the water. We usually swap depending on the pressure and water flow. We have found that replacing the DGD 5005 filter at the first drop in water pressure allows us to use the RFFE20-BB filter for another 3-4 weeks.
Filter under the sink Aquaphor Favorit ECO silver
20 Review
NANPU 1/2" NPT Air Drying System - 5 Micron Particulate Filter, 0.01 Micron Coalescing Filter, Air Pressure Regulator Combo - Semi-Auto Drain, Poly Bowl W/Metal Gauge
23 Review
NANPU Compressed Air Filter Regulator Combo: Brass Element, Semi-Auto Drain, 0-150 Psi Gauge, And More
21 Review
NANPU 1 FRL Air Filter Regulator Lubricator Combo With 0-150 Psi Gauge, 5 Micron Brass Element, Poly Bowl & Semi-Auto Drain - Metal Bracket Included
20 Review