D5 PWM pump with readable PWM control board. Does not work properly with the Aquaero controller. At less than 50% of max speed, the controller saw 2000 RPM as max speed. This made it difficult to fill the circuit with liquid. The Swiftech and EK PWM pumps worked great on the same controller. Works great on the motherboard header, but it doesn't help if you try to fill the loop and blow air. Two of these are used in series in a circuit. The intention was to drive them separately to even out the speeds a bit to reduce noise with harmonic suppression. As a workaround, I've found that if you place a powered fan hub between the controller and the pumps, they work correctly. This requires adding two separate PWM hubs. Had I known this I would have just paid extra and bought another brand new EK D5 which works great and hooks up directly to the controller which I most likely would do anyway and return both of these pumps.
Seagate Barracuda 1TB HDD ST1000DM003
93 Review
AMD Phenom II X4 940 π» Black Edition 3.0GHz AM2+ Processor - Retail
96 Review
π Power Up Your Gaming Rig with AMD Ryzen 5 2600 Processor with Wraith Stealth Cooler - YD2600BBAFBOX
116 Review
π¬οΈ Silent Cooling Power: Dark Rock Pro 4 CPU Cooler with 250W TDP, BK022
134 Review
M.2 Screw Kit: Easy Mounting for NVMe SSDs on ASUS Motherboards
19 Review
MacBook Retina 13-inch (A1425, A1502) and π© 15-inch (A1398) Bottom Case Screw Set with Pentalobe Screwdriver
11 Review
π₯οΈ Helifouner 450-Piece Computer Standoffs Spacer Screws Kit: Ideal for Hard Drive, Motherboard, Fan, Power Graphics & Computer Cases
10 Review
36-Pack Black Rubber PC CPU/Case Fan Screws/Rivets Set for Computer
11 Review