Review on Sanus Full Motion Mount Extends Studs by Payton Luna

I bought two of these to set up two 65 inch Sony X900Fs in my living room. I mounted them side by side to play online games with friends on separate TVs, but I also needed to be able to rotate one to the side and the other to the center of the room when watching movies, so I needed a pivoting one Bracket. which could swing in any direction and be flush with the wall. This one does exactly that. I've read many reviews of bracket sagging, installation crooked, impossible to level, NO post level adjustment. and I was very concerned that I would install these mounts to find exactly these problems. I am a union locksmith by trade and am very meticulous and concise in my work. I managed to install two TVs side by side, absolutely identical and absolutely flat. you can do it too I'm not sure why there are so many complaints about TBH. I haven't used the instructions or the website for anything. I opened the box and everything was very obvious. I first modeled the fully assembled TV mount and measured the mounting screw holes on the bottom of the TV. This gave me the information I needed to set the correct height. Then I pulled out the laser plane and shot through all the markings on the walls. Brackets pre-drilled and installed, bracket installed, TV installed and everything looked perfect. sit all the time. There's a crappy little tweak for that. Hardly works, but sufficient. For reference, the arm doesn't sag, there is play in the tilt adjustment. Adjust the angle of inclination and put a 16 gram sheet on the sides if necessary. I almost did it, but it wasn't necessary as the rack level adjustment was enough for me. All in all a very solid mount, sits very firmly on the wall and has excellent freedom of movement. 10/10 again and would recommend.