Review on 📺 Mount-It! Tilting TV Wall Mount Bracket - Samsung Sony Vizio LG Panasonic TCL Element - 32-65 Inch TVs - VESA Compatible - Premium Tilt - 175 Lbs Capacity by Bryan Aleman

This is a very strong mount that seems capable of mounting much heavier TVs than today's LED TVs. Installation is simple and straightforward, and the kit includes hardware to mount virtually any TV to any wall surface. After reading several other reviewers' comments about the built-in level, I used a carpenter's level instead of relying on the built-in level. Based on that, I've found that the built-in level differs slightly, but probably not enough to bother most people. The only problem I had was easily solved, but without the right tool it can be problematic. Two pins each go through the vertical supports, with which you can adjust the viewing angle. These pins are held in place by spring clips "C". On both of my vertical supports, one side of the bottom pin came loose leaving the spring clip and washer loose in the packaging. I have spring clip pliers so it was easy to fix. Without the pliers this could have been a bit annoying. A potential issue for some may be the length of the vertical supports. The box and description from Revain states that the mount is designed for 32” to 60” diagonal TVs. On my 40" Sony TV, the vertical supports were the same length as the height of the TV. On a smaller TV, they'll obviously stick out at the top, bottom, or both. If you're using them with a TV smaller than 40 inches, I recommend going down to the next smaller size.