Review on Agile Shop Multi Function Reader Dashboard Headphone by James Jenkins

Pros: Many ports on the front CONS: Poor quality (control) and dangerous design1. The audio jacks are glued 2mm inwards, the jack didn't fit in, so I opened the case, cleaned the hot melt adhesive, put the jacks in the right position (front flush) and glued them back on. Make sure there is no glue in the top groove for the top case. I didn't understand that :(---Problem solved. 2. The audio jack (LR) sides are changed! So I swapped two cables from the board connector.--Using a thin needle or screwdriver, carefully pry the plastic latch, latch don't break!Pull caution.--The connectors are in the (bottom) 5-pin row (not the 4-pin key side)--Center and rightmost should be switched, white in the center and purple on the right. --- Problem solved!3. Worst of all is the 5/12V connector with active pins, no female connector, so you didn't find the right cable - you need to build one with female connectors on both sides!, to connect all standard devices .--DANGER You can burn your circuit board, power supply PWR or anything else if metal parts come into contact!