16Pack ZUCKEO Low Voltage Connectors For Landscape Lighting Wire - 12-16 Gauge Cable Connector For LED Flood Yard Light Outdoor Spotlights Review

So, it is pretty straight forward how they work. I did a little practicing with a set up before actually connecting. The connectors work pretty slick. If you have a thick gauge wire, it can be a little tough slipping the connectors over the wire. Pinching the wire with pliers gives the appropriate purchase point to get the sleeve to easily go over the wire. I would suggest Zuckeo to do a youtube video on making the connections, because before purchasing, it is a little hard to look at the item…

I’ve used the previous version of these connectors and these are an outstanding improvement. Used for low voltage wiring in 12 and 14 gauge.

Easy to install but the bottom the wire has to be the right size or you have to trim some of the insulation off. The top wire from the light was small and left a gap so I put caulking around the area.

These were purchased on a recommendation by another user and they do not disappoint. Very easy to install and they provide a solid stable connection. I will be replacing all my standard light connectors with these.

I feel like I am late to the party in discovering these magical things! Fighting for years with low voltage connections and rewiring fixtures - just ordered more to finish reconnecting rest of my lighting -Thank you!

I was somewhat hesitant when I first read about these but ordered, received them and very easy to install. As well, the top caps with screws work perfectly. Using them to 12 volt lams for the garden but ordered an extra set to expand the lights and will likely use them for anything else I may need.

Since I moved into a new house with lots of landscape wiring I have been searching for a good connector. This is definitely it. They are so easy to use. You don’t even have to cut the wire you are tapping into, just split the wires apart a few inches then screw these on. They are very well made and are water tight. Some of my oldest wire is 12 ga and that is too thick for these to fit over, but the new wire you can get at Lowe’s or HD is 14 or 16 and these connectors work great with that. I’ve…

These are a great product compared to the standard wire connectors with most low voltage lights. You do have to separate the two wires from each other, and it can be tricky without cutting the insulation, in particular on older, stiffer wires.

I’ve alway had a hard time connecting landscape lighting to its power supply but with these connectors they were really easy to do and the lights came on no problem it’s the best product I’ve ever seen

Landscape lighting connections have always been awful until this simple invention. Replace old connectors you don’t have to worry again.

These are a great replacement. They are easy to install. More importantly they are easy to remove and move to new location. Works well with various lights. If you have a light with the push style connector simply cut off the connector and use these as a replacements - you will be happy you did.

I love the fact you can simple screw down the connector body onto the wire and connect the landscape lighting with a screw down method with no hassle. To ensure I have a watertight solution, I used a spray one coating and let it dry and follow up with a black tape to securely protect the electrical connections. Its takes about less than five minutes to connect each of your landscape lights using these connectors.

These seemed expensive, but are 1000x easier then using outdoor wire nuts for landscape lights. They hold secure, you can reuse/move them and you don't need to cut/strip/splice whatever wire you tap into!

These connectors are easy to install and work very well. Just be careful not to cross the threads when screwing the parts together. I would also suggest sealing the light wire entrance with silicone rubber to prevent water from getting in and corroding the wire over time. Great product. Highly recommend.

I highly recommend their connectors opposed to standard wire nuts. They make the landscale lighting set up process much, much easier! Trust me when I say it's well worth a little extra money opposed to standard, old school wire nuts.

The connectors are not as pretty as what I had but they are SOLID! I put a drop of silicone kitchen caulk over the point right before assembly to 100% seal the entry wound through the insulation. I then put dielectric grease in the top part to eliminate potential corrosion. After assembling the top part, I sealed the wire with more caulk. NO CHANCE they will fail!. Hightly recommended!

Only had problems with one connector, it seem to not make contact so I tried another one and it worked fine That's my feedback.

This is the greatest products since spreadable butter! Extremely easy to use, very fast connection, no cutting or splicing. Highly recommend this product

Installed easily. Holds all wires tight. Being black they hide easily. Water resistant yes. Water tight no. Keep out of water. Will buy more. Time will tell if they fail in the sun.

These are what I've wanted for years! Up until ordering these, I used the plastic clip connecters that were difficult to clip into heavy gauge wire, they break easily, and they eventually corrode.These 100% fix that. These would have saved me countless lost hours repairing corroded connections. I can't see having to use anything else in the future--love 'em!