2PC 24 Inch Dual Color Red/Sequence Amber LED Headlight Strip Tube | Waterproof DRL Switchback Glow Light Decorative Lamp For Car Review

I've been looking for a red/amber set of lights in this style and when I found these I ordered them immediately. Going by the pictures I was thinking they would be like another brand I purchased which were white and amber.When I received the package they were in a clear ziplock type bag inside a padded mailer. What I didn't like when I went to install them was that the adhesive mounting strip was applied to both sides of each of the lights. It has a blue plastic you remove to mount it but if…

It does not have installation instructions. It is made of a very flexible material but when it is folded aroid the headlamp, it got disconnected inside creating false contact. The wire is too short then you have to make grafts to be able to connect it. The adhesive tape is not strong enough then you have to put additional tape. In the amber mode, when you put a turn signal, a the half of the function is interrupted because there is no way to regulate the time it takes to blink. Red mode only…

Works as expected. No installation hassle. Red wire to 12V positive source (this lids up the red lights), Yellow wire is to be connected with positive 12V of the turn signal bulb, while black wire should be connected to any ground wire (negative, or sometimes to car body). It’s up to you to find the right points to hock it, but the product itself is easy as 1,2,3. Fitted to my R-350 as if it was stock made.

Was a little disappointed as they did not work on my motorcycle they look good testing off the battery but once connected they did not work at all the red is more like a pink magenta not very bright at all. Laughable to think he could use them during daytime running lights. You’d have to be in the woods in the middle of the night to really see them

Yea these aren’t the best. I have a red and black theme for my suv so of course red LED would set it off completely! Well first these don’t come with a resistor box for the turn signal. Second, they’re not really bright. Third, it’s not really sequential. And fourth why was there tape on both sides?! Yea it’ll stay on my truck until I find a different set to put on that’s better! DO NOT BUY THIS TRASH PLEASE! I am so unsatisfied!

This product is easy to install and works as advertised however, the double sided glue straps that are attached to both sides is trash. It won't stick to the intended surface. This item needs to have a better glue system.

Get yourself some alligator clip wire leads to run from battery to the lights/place you are adding these led lights to. That way you can keep testing them to see that they are still working properly when they won't work on your cars electrical system. Mine work perfect with the engine off, stop when engine is on. Nothing wrong with LED it's just not compatible with a stock wire harness and will need troubleshooting skills.

What I didnt like is that the first half of the strip lights up with no travel, then after the first half the light travels.

These lights look great when first testing them out. Unfortunately, the quality is extremely low and I had multiple sections of the LEDs burn out before I even fully installed the strips and wiring. Save your money and put it towards a higher quality item.

Extremely poor quality. Silicone sealant smeared on the lens portion. The double-sided tape makes no sense. There are no instructions included. The box is simply a plain white box. I would not recommend this product at all.

Lights burnt out after 2 days in the cold temperatures, and wires are delicate. ordered 2nd pair and installed with care, only to have 3 leds dim or burn out 2 days after installing (same as 1st pair)

Takes you some time to install on cars that don't have have "DRL"s but are easy to follow with installing. Only critical I have is yes the power leads should be thicker than what they are so take your time installing to your application and have a design ready before you start.

Laughably dim during daylight. Use it as a cosmetic accent light, but never a safety light. Nobody will see the turn signal. The red was more a magenta/pink than a true red. I had high hopes for this for a project, but now it just sits on the shelf.

I got faulty product and it wasnt very bright at all. Very disappointed. Not very bright. when hooked up the passenger side worked fine but the driver side turn signal didnt change to amber

Product works great. I had to cut these down a few inches and no issues at all. I do wish the wires were a little thicker but they are easy enough to work with

If your thinking about buying these, do that. They work wonderfully and they look great if you want something temporary as a mock up. As for permanent don't expect that, I've owned them for a bit and they gave out about 3 months in. The gauge wire used burned up due to the output on my car (Wish they would give a bigger gauge wire for this reason) also if your installing please remove the double sided tape and get a clear doubled sided tape from Walmart or Ebay to replace it (My suggestion is…

Buyer beware. they don't last more than a month. I purchased 3 sets thinking next set would be better but No these are cheap quality that looks good. I actually ripped the last pair straight off my car in one word. Garbage!

Looks great, it's bright enough to see in the sun. You really have to know have to wire them on your own since it doesn't come with instructions but overall a good product.

After a few weeks. One of them randomly cuts out. All connections are good. These are just cheap.Oh. They are also not very bright in direct daylight compared to the better made ones.

The double sided tape is trash doesn’t at all. Hardly even sticky, it pulled right off the strip. Very tiny wires makes it difficult to put wire connections on. Lights are bright