Header banner
Revain logoHome Page
aclorol individually addressable programmable 12mm diffused logo

Aclorol Individually Addressable Programmable 12Mm Diffused Review

6

·

Average

Revainrating 3 out of 5  
Rating 
3.2
⚡ Novelty Lighting, 🌀 Lighting & Ceiling Fans

View on AmazonView on ЯM

Media

(4)
img 1 attached to Aclorol Individually Addressable Programmable 12Mm Diffused
img 2 attached to Aclorol Individually Addressable Programmable 12Mm Diffused
img 3 attached to Aclorol Individually Addressable Programmable 12Mm Diffused
img 4 attached to Aclorol Individually Addressable Programmable 12Mm Diffused

Description of Aclorol Individually Addressable Programmable 12Mm Diffused

2021 new upgrade LED pixel light string, each string of 10m 100leds. It is long enough to reduce repeated connect and convenient to use. Also it can to reach around your entire room and light the whole place up. Perfect use in many places, such as advertising box, billboard lighting, logo sign outdoor advertising sign, KTV, bars, commercial street atmosphere lighting and so on. The LED string light has good waterproof performance, each RGB LED and controller chip are sealed in silicone. Meanwhile, it is connected with 3 pin waterproof electrical connector, ensure that can be used perfectly outdoors, even underwater. The connector is reliable, safe and light, it is a very useful accessory when installing waterproof LED string lights. 256 brightness display and full 24-bit color display. Each LED have its own color and brightness. 10M long string lights will not voltage drop during use. You can control each LED individually through the controller so that it can light multiple color or single color at the same time. 12V WS2811 individually addressable led pixels light, easy to program when you use a programmable controller such as T-1000S, K1000C etc. It also can be controlled by APP controllers, like SP106E, SP105E, SP601E, SP107E ect. To realize a variety of dynamic effects, such as gradual change, strobing, rainbow, fading, breathing, etc. You can also DIY the color effects your want. 12V output voltage lower than standard body safe voltage 36V Each pixel can be cut off without damaging the rest pixels. So you can shorten or extend the distance between two pixels if you want. And you can easily bend it to what you want shape, so as to realize DIY.

Reviews

Global ratings 6
  • 5
    1
  • 4
    2
  • 3
    1
  • 2
    1
  • 1
    1

Type of review

Revainrating 3 out of 5

Excellent flashlights, I recommend

No problems with these flashlights. Used them for the first time this Christmas for the Christmas tree and some elements outside the house under the eaves. Easy setup with wled software and esp8266 or esp32.

Pros
  • Weight
Cons
  • Difficult to say

Revainrating 2 out of 5

Smaller wire size than expected but they work.

I was surprised it was only 20 AWG wire but so far they are working fine. I just installed them so time will tell on durability. The colors are even and look great.

Pros
  • New to my collection
Cons
  • Upgrade available

Revainrating 1 out of 5

Connectors are not standard

Good luck finding connectors for this. The thread is on the plug, not on the socket. I'll cut them off to make them work now as I don't have time to find connectors that work. I bought these because they had power connector tees that are hard to find. What a disappointment. That's why standards are important!

Pros
  • Cool product
Cons
  • A long time ago

Revainrating 5 out of 5

Great headlights only 1 problem.

Pro: Bright Bright Bright! The colors match very well. Good wire and they are waterproof. Paired with Nodemcu and Wled and they are great. Cons: There is a dead LED created and freed. If I had time I would just get a replacement but they had to rise so I cut off the first 4 and stretched them to fit. Otherwise it would be 100% 5 stars.

Pros
  • also understandable for the old ones
Cons
  • Something is wrong

Revainrating 4 out of 5

Works well with Raspberry Pi Falcon Player

These strings work great with Raspberry Pi Zero Falcon Player. I control the strings (3x100) from a raspberry pi zero w via a level switch to boost the pi output from 3.3v to 5v. The color order should be set to GRB as another reviewer noted. I'm running the whole thing (3x100 strings and a Raspberry Pi null) from a single power supply connected to one end of the string, it looks like I won't need to add power through the Ts provided, hopefully still when I join Add the extra length of wire, so

Pros
  • Large selection
Cons
  • Zero

Revainrating 4 out of 5

Great headlights only 1 problem.

Advantages: Bright Bright Bright! The colors match very well. Good wire and they are waterproof. Paired with Nodemcu and Wled and they are great. Cons: There is a dead LED that created and output. If I had time I would just get a replacement but they had to rise so I cut off the first 4 and stretched them to fit. Otherwise it would be 100% 5 stars.

Pros
  • Pleasant to use
Cons
  • Very expensive