🚗 Alvar New Bushing Kit: Club Car DS Front & Rear Leaf Spring Replacement for Golf Carts - 1992 and Up Models Review

Perfect fit for my 03 CC DS. You must keep and use the original screws. This kit replaces the bushings on the front blade, upper arm and rear panels.

rubber bushings, but metal bushings have too large an inner diameter. Manufactured for various larger diameter screws. The standard screws are loose in the bushings resulting in slight play. Not seriously, but definitely not as good as stock.

Description for front or rear 16 bushings per set 12 identical and 4 larger and heavier. Which goes where? no specification and I needed a rear leaf spring kit. also. I used old sleeves. The ones that came with it were either longer or shorter. everything is confusing.

Front socket and metal sockets installed without any problems. When I lifted the back of the bogie to install the rear leaf spring bushings, the metal bushings are about 1/2 the width of the spring, there is no installation method. This is a 2005 Club Car DS, from the kit description I assumed they should fit

I can't remember if this is correct or not, but some metal cases were the wrong size (not long enough). I'm pretty sure they should be flush with the grommet, but they're too short for that. Two of them were perfect, the other 4 in the back were short. Otherwise they look ok.

I have a 2005 DS Club car. I started by assembling all the jacks and connecting them to the correct jacks. The passenger side went first, and although it was difficult to get the bushing into the bushing control arms, I managed. But when I got the last two bushings, the bushings didn't want to go into the front leaf spring. I noticed the thickness of one of my sleeves was much thicker than the others. I also somehow got 1 odd length sleeve for the upper outside arm. I ended up having to cut the