Enhance Visibility with 4-Inch LED Fog Lights & Halo Ring for Wrangler JK Review

Great lights, bright halo and bright fog. I had to flip the harness socket to get the correct polarity and secure the connectors with a zip tie since the latch was on the opposite side.

Perfect fit for my 2007 Wrangler. While it plugs directly into your existing wiring harness, additional halo lighting naturally requires a switching power supply. I have my parking lights on, so when my parking lights are on, the halo lights come on. These lights were easier to aim than the original equipment. After more than 10 years of exposure to the elements, the lens of the original flashlight was badly scratched/fogged up. This is a good update and I am very satisfied.

The first thing I did was swap the bumper and fog lights. The mounting tabs seemed to match the EAG bumper well, the lights are nice and bright and the halos look nice. My only problem is the connection adapters. The connector that connects to the standard wiring harness is not properly manufactured. The connector has a notch that only allows it to be inserted one way BUT when it is plugged in the notch for the retainer is on the 180* side. A simple zip tie to fix this but it's a stupid flaw in

Looks fantastic. I put a halo on my fuse box so they stay on while my car is on and the regular fog light part works as usual. To fit them I had to disassemble them and put them back together with the old fog light bracket in the middle. In doing so, I was only able to use two screws that matched the holes and two that didn't. After everything was done, I just reinstalled them as usual, routed the wires neatly through the engine compartment, shorted everything and everything worked great. I…

Headlights work fine after no power problem fixed. On the Dodge Magnum (most likely the same for the Charger and Chrysler 300) you have to flip the connector when connecting. The lock of the lamp lock should be opposite the lock of the connector on the car. An easy way to provide power is to make sure the black wire on the headlight is on the same side as the black wire on the car. Also connect yellow color of fog lights to hot side(white wire) of fog light connector or hot wire of your car DRL

We have ordered DOT approved 4" Halo Ring Fog Lights for our 2017 JW JKU and DRL wiring harnesses. To install, we first removed the front grille and valence by connecting the wiring harness to the M7 fuse in the engine fuse box in the accessory position. This provides power when the key is on the halo ring. and connect the supplied adapter / pigtail with the headlights. We then removed the factory headlights by removing the four mounting bolts from each headlight. Removing the bolts was easy as