🚗 Auto Meter Z-Series Electric Oil Pressure Gauge, 2-1/16" (52.4mm) - Reliable Oil Pressure Monitoring for Optimal Engine Performance Review

Works great on my F150. Used with OIK filter sandwich adapter. Now I see the real pressure in the system. Not the fake gauge Ford used.

My previous mechanical gauge no longer leaks oil, I replaced the incandescent bulb with an LED and that seemed to fix the fogging problem. The sending device is installed on the expansion port.

The plexiglass pane immediately began to mist up because the lightbulb was on. I turned off the ignition and prevented it from becoming unreadable. Whether the sensor is accurate or not doesn't matter if you can't even read it! $75 for cheap Plexiglas is unacceptable.

It didn't work when it was first installed. The wiring has been done correctly and according to the instructions. I removed the gauge and applied 80psi to the gauge hole. After 5 minutes of operation, the sensor started working and is still working. The sensor membrane may be stuck. I don't know the accuracy of the sensor. My mechanical gauge shows a 5 pound difference. Either one or the other is wrong.

Always a great Autometer & Made in USA product. WARNING! If you are installing the filter on a Crown Victoria, Lincoln Town Car, or Mercury Grand Marquis: You must insert a 1/4 NPT elbow into the bottom inlet opening of the filter housing and extend it forward (toward the front of the filter housing) AT LEAST two inches the vehicle). with 1/4NPT extension. If you mount the sensor right out of the case, your control stick will break it when you turn right. When you move it forward, it doesn't…

hated the dummy oil level sensor in my 02 F150. This pressure gauge works great and reads the pressure as it should. I installed this meter in a 99 Heavy Duty Auto Meter gauge and installed it in my truck. The pressure gauge comes with everything you need for installation. I had to buy a set of copper wires/compression fittings to install mine on my truck. I would recommend buying an automatic pressure gauge. I also have a temperature sensor, works great. Everything you need was included in…

Works well, easy to connect. I love having an oil pressure gauge on all my cars, it's a nice easy way to keep track of engine health. I had an adapter that came with the stock oil pressure switch on my LM7 5.3 and it fitted perfectly. It uses 1/8 NPT threads but every motor is different so just google your app. The sensor is a bit larger than I imagined, but I haven't had any issues with the gap. Run a cable from the gauge to the gauge and then take a fuse connector like this…