📷 Brinno ATH120 Camera Housing Case - Excellent Weatherproofing for Outdoor Environments & Extreme Video Shoots - Compatible with Brinno TLC200 PRO HDR Time Lapse Video Camera Review

I've been on the construction site for two months, regardless of the weather. The only recommendation (and adjustment I had to make) was to add a shadow to the transparent body. The New Mexico sun is too hot and heats up the camera and dramatically reduces battery life. A well designed and well made product, this case is a must have if your Brinnoni is going to be spending any time outside.

Fits the camera PERFECTLY. Actually almost perfect. This is a tight fit. When trying to replace a memory card with a bracket mounted camera, it may be difficult to open the door, remove the camera, remove the chip, swap the camera, close the door and the camera at the same angle to keep . .But this is a VERY SMALL problem. The body itself is airtight and the lens cap does not distort or obscure the view in any way. Very happy with this purchase

I can't see why anyone would have a Brinno TLC200 Pro but not either (unless you're shooting indoors). Fits the camera like a glove. It's plastic, of course, so you'll need to carefully line up the latches - if something feels 'forced', you're doing it wrong, I keep mine in a zipped plastic case in my camera bag to protect it from fingerprints and scratches . .You need one. Easy. buy one

Received my weatherproof box today. A few things that kept me from liking it: - the lens is positioned at an exact 90 degree angle to the body - the tripod or mounting screw on the bottom is attached to the door, not the body - it is Impossible to turn on/off unless you open the door. Some positive aspects: - The seal around the device seems to be very good and all the extra holes (around the lens and tripod mount) are covered - The clear plastic is very easy to clean. I'm going to shower with…

If you're shooting time-lapse with a Brinno camera, a weatherproof housing comes in handy. I left my TLC200 outside for two weeks with rain forecast and it rained for several days without moisture reaching the unit. The case provides access to all but one camera function. You have access to menus, time, settings and even hard drive and USB connections. I just want to turn off/on the camera. The housing has its own 1/4 20 screw mount so you can still open the housing and leave it in place to get

After researching on the internet I bought a 200Pro with a protective cover (nice design) and a 32 GB SDHD card. I needed this product in a hurry with overnight delivery (it arrived quickly the next day). The recommendations for programming and installing the 200Pro are very simple. The installation of the camera in the housing went like a glove, perfect! Both the camera and housing accept a standard 1/4" threaded screw for installation on a lightweight tripod or CCTV camera mount. Since I was…

The bag fits the camera perfectly and, as already mentioned, is almost a shame. It fits perfectly, so don't plan on aligning everything perfectly between battery or card changes. I liked it a lot in my use since I wanted to mount my camera on my motorcycle. I've ridden over 150 miles in the rain and there was no leakage. The lower sides take advantage of the Brinno camera's ability to tilt the lens. In particular, I wish there was at least one more option for the lens with 180 degrees (looking…

This is the weather cover for the Brinno TLC200 PRO. I bought it despite the bad reviews and if you need it you must buy it and I'm not saying to avoid it. There are two problems here. The bottom lock is weak. It kind of crashed around the tripod mount, although it's not broken at the moment. I'm just being careful with this and suggest you be careful. Secondly, the inside of the device will fog up and ruin your photos. I got around this by placing a packet of desiccant found in various…

After researching on the Internet, I bought a 200Pro with a protective cover (nice design) and a 32 GB SDHD card. I needed this product in a hurry with overnight delivery (it arrived quickly the next day). The recommendations for programming and installing the 200Pro are very simple. The installation of the camera in the housing went like a glove, perfect! Both the camera and housing accept a standard 1/4" threaded screw for installation on a lightweight tripod or CCTV camera mount. Since I was