🚽 Camco Easy Slip Elbow and 4-in-1 Sewer Adapter: Effortlessly Connect RV Sewer Hose to Dump Station (39144) Review

This device makes it easy to connect the waste water hose to the drain of the camper van park. Suitable for drains of any size. But the plastic tabs that hold the elbow to the flange need to be bigger. In some cases, the elbow slipped out of the flange. If this is not noticed and fixed, a nasty mess can ensue!

It works as intended. Makes it very easy to attach a sewer hose to a riser at an RV park. When used in a dump, which in my experience always has a larger hole than this bow, it will slide to the right, but you can use a rock or dump hole cover to hold it in place so it doesn't tip back. off, although I've never had a problem. I would definitely buy again.

Our caravan is fitted with one of those flexible corrugated waste water hoses that run from the trailer to the sewer 'connector'. I've never had an ending like this before. I just saw this while looking for something different so I ordered and installed it and it makes a huge difference to me. Fits snugly in the hole in most parking brackets. A much cleaner solution than just lying there hoping it all flows down the hole without spilling or making a mess. I know it sounds silly to get excited…

I bought this to use with a Cruise America rental car. The 3 inch coiled hose that came with the van was VERY tight. It would jam if the coil gets tangled. Turning the clamp worked like a dream. The guide was already set up correctly for the Cruise America hose (hooray!) After that everything behaved correctly and easily. Smooth: Turning the clamp the other way and removing the hose was easy as it didn't turn that way. It was possible to work with one elbow in gloves.

Bought a while ago and just trying to use it. The two parts that make up this "elbow" are connected by two tiny "eyelets" made of soft plastic. Tiny. 1/8 square and 1/8 long (short). These are fragile, soft, delicate little things. How it works is you start with two separate halves. The threaded part is first screwed into the drain pipe at the RV dump. The "knee" attaches to the end of your tubing, which is tricky in itself, and then this piece attaches to the threaded part by inserting these…

Draining the old black tank, who doesn't love this job! Luckily, this nook and drain adapter makes the process a little easier and less messy. The elbow converts to a 3-inch drain hose fairly easily, and a metal ring returns to the hose's threads and holds it in place. Angle and 4-in-1 drain adapter can be easily connected to each other. In almost all cases, the 4-in-1 threaded adapter fits securely into every drain I've come across, allowing me to go about my business without worrying about…

Consists of two parts: The elbow screws into a wide round drain adapter. The elbow is designed to screw onto most drainpipes. However, it depends on how the drain pipe is made. Product ships ready to thread or thread onto Camco hoses, but other hoses may thread in the opposite direction. Alteration instructions are printed INSIDE the paper packaging which I haven't found in weeks. If you follow them (you need a screwdriver), the system works fine. Leaving the knee attached to the hose, I stow…

My camper came with a hose that had nothing at the end. Draining my tanks was a bit. Shaky and it seemed to help. This was particularly evident when I bought an external tank so I could control everything without moving the RV while hunting. I bought a lightweight glide angle and adapter and it meets all my needs. It was difficult to put on and I was afraid that the size might not be right, but if you are patient you can put it on. surprised to learn that it keeps twisting and turning for such…