🔌 Enhance Olympian Wave Heaters with Camco 57633 90° Elbow Connector Review

Ideal as a corner fitting for a portable gas generator. In this case, the gas hose can be firmly connected to the generator and secured. Without an angle adapter, the hose sticks out straight - the generator will not fit through the door opening and the gas line can be torn off. Received the next day and installed right away.

I bought a cap for the XP4400EH generator and as the propane inlet was protruding straight out of the block this cap didn't fit very well and couldn't fit in the narrow storage hole. This 90 degree rotatable faucet solved that problem. The installation took an incredible 2 minutes. The case now fits as if no hose were attached to it and slides into a narrow storage hole. Thumbs up from me "AWESOME"

Hello everyone. I've been using these plugs for many years and haven't had a single problem. I've used them on a Mr Heater 9000 BTU propane heater as well as an Oly Wave #6 propane heater for the last 15 years in everything from an RV to a Class A RV. You will never have any problems and this will never wear out. From Dan and Austin (my Yorkshire Terrier).

My project saved. For some reason these female and male fittings are very hard to find (can't find them at regular hardware stores like Home Depot and Lowe's). They are standard JIC 37 degree fittings, but SAE 45 degree fittings are the only ones I have been able to find at a good price for low pressure propane applications. Parker sells one that may be better suited to higher pressures, but is expensive in comparison and has a longer delivery time.

The quality of this 90° rotating armature seems solid. This is a 3/8" male/female propane/natural gas fitting (straight non-tapered thread with male coupling head and female reverse coupling head). Perfect for my application that needed to add 90° between a female propane regulator. Hose to my generators 3/8" male inlet connector. This fitting made it very easy for me to angle the propane hose the way I wanted. No leaks or flow issues. Would buy again. Hope the photos and review help.

I don't know what the Camp Chef engineers were thinking when they installed the rubber propane hose connector at the angle they have on these camp stoves. I used this to connect the metal pipes that go to the back of the stove so I can attach a propane hose there without causing any damage. This also allows the stove to be detached from the leg extensions and placed on a hard surface if required without damaging the hose. This connector has a swivel on the female end so I can position the…

My natural gas generator has a natural gas inlet and the hose sticks out vertically on one side. When I connect it to the natural gas line, the hose sticks out too. It was dangerous for someone to trip over and/or jam the natural gas line/hose/connector. I used this 90 degree elbow to direct the natural gas line down. If the connection is loose, it means you twist it into place and then tighten it. This locks it in place. market but luckily it was just what I needed!

I bought this for my Olympian Wave 6 catalytic safety heater. Fits perfectly. I made a hose to connect this fitting to a 20# propane tank. The tubing I made locally cost $70. Once I had everything together (the propane tank, the hose, that 90 degree elbow and my heater) I re-read all the instructions in the manual and found that there was a hose here at Revain for about $40. If you google "Camco LP gas hose with 57703 regulator" you will find the hose. All you need for this heater is a heater…